Description
Enerdrive ePRO Combi with Remote EPC-1600-12-KIT Under the Bonnet Enerdrive Offers A New Innovative Trigger-Action Feature For The ePRO Combi Inverter / Charger Series Add virtually unlimited control to your power system. The Trigger-action feature enables you to assign certain events (triggers) to user defined actions. You can for example configure the ePRO Combi to perform an action when a certain voltage, current or temperature level is reached, or perform an action when an external switch is closed or opened. This offers great flexibility and may in some cases avoid the need to invest in additional external hardware. A few practical examples are : Disable inverter mode using an external switch Activate a relay when the charger enters float mode Stop charging using an external switch (i.e. from external BMS) Turn off an AC load when the inverter is overloaded Only activate the transfer relay when the battery is almost empty Turn the AC Input boost function on or off depending on generator or mains supply Dashboard Configure and readout your ePROLink enabled devices Supports multiple Enerdrive ePRO devices Check all settings, status and history data with just the click of a button Use the advanced data recording wizard to log all available parameters Output logged data to Microsoft Excel for further analysis Open individual readout/control panels for each device with real time parameter info Create custom charge programs Rename your device (i.e.Starter battery,Accessory bank charger) Many new features will be added periodically Will be supplied along with each communication kit (USB or RS232) Windows XP, Vista and Windows 7 compatible Applications Tool for installation and service engineers Large screen real-time monitoring Battery analysis Note: Measured with resistive load at 25degC ambient. Power ratings are subject to a tolerance of 10% and are decreasing as temperature rises with a rate of approx. 1.2%/degC starting from 25degC. Pnom is a typical value, measured using battery capacities of 200 Ah @ 12 V and 100 Ah @ 24V Undervoltage limit is dynamic. This limit decreases with increasing load to compensate the voltage drop across cables and connections. At high ambient temperatures, maximum output current shall be reduced automatically Part Number EPR-EPC-1600-12-KIT EPR-EPC-1800-24-KIT Output power (1) Pnom 1300W 1400W P 10minutes 1600W 1800W P surge 2500W 3000W Range 10.5 (2) 16 Vdc 21 (2) 32 Vdc Max. efficiency 92% 94% Max. continuous charging current (3) 60A 35A Charge algorithm IUoUoP, intelligent 4-stage, temperature compensated (programmable) Maximum continuous current 16 Ams DC connections Two wires, length 1.5 meters, 50 mm (2) AC connections Screw terminals Standards Complies with IEC 60335-2-29 including Australian deviations Part Number Nominal Input Voltage Output voltage / frequency Weight Enclosure body size EPR-EPC-1600-12-KIT 12V 230 Vac± 2% / 50 Hz± 0.05%W 10.7kg 351mm x 210mm x 114mm EPR-EPC-1800-24-KIT 24V 230 Vac± 2% / 50 Hz± 0.05% 10.7kg 351mm x 210mm x 114mm
View AllClose
