ICOM

ICOM LTE Push-To-Talk Full Duplex Mobile Transceiver

(No reviews yet) Write a Review
RRP: AU$595.00
Now: AU$520.60
— You save AU$74.40
SKU:
IP501M
Availability:
Usually Ships in 2-3 days
Shipping:
Calculated at Checkout
Found at a lower price? Please, select required options.

Description

ICOM LTE Push-To-Talk Full Duplex Mobile Transceiver

Wide Coverage Over an LTE (4G) and 3G Network, Mobile LTE Radio Interoperable with IP501H/IP503H

Nationwide Coverage over LTE (4G) and 3G Networks*

* Service availability varies by country. Network coverage provided by a custom Icom SIM card.

FEATURES

  • Interoperable with the Handheld IP501H/IP503H
  • Simultaneous TalkListen Function for Full-Duplex Communication
  • Priority Interrupt Calling Can Break into an On-going Call for an Important Message
  • Text Message Function Allows You to Send and Receive Messages of up to 32 Characters
  • Safety Features with Emergency Call & Lone Worker Functions
  • An Ethernet Port for Data Communication*
    • * The optional VE-PG4 is required.
  • D-SUB 25-pin Connector with the Optional OPC-2407 Cable for Interfacing Other Devices, Various Controls and Data Communication
  • ACC Connector for Ignition Sensing Function
  • Noise Canceling Function (TX only) for Clear Audio in Noisy Environments
  • Built-in Bluetooth* and GPS
    • * Version without Bluetooth also available. Ask your Dealer for details.
  • Optional COMMANDMIC™ Provides a Handheld-like User Interface
  • Interconnection with the IP100H and IDAS™ Systems Using the VE-PG4, RoIP Gateway
    • With a VE-PG4 RoIP gateway, the LTE radio system can interconnect with an IP phone, IP, IDAS digital and analog radios.

## Specifications##

GENERAL

Current drain
(Maximum)
TX Less than 0.6 A (13.8 V DC)
Less than 0.4 A (26.4 V DC)
RX Less than 1.2 A (13.8 V DC)
Less than 0.8 A (26.4 V DC)
Operating temperature range –10°C to +60°C; 14°F to +140°F
Dimensions (W × H × D) (Projections not included) 125 × 29 × 156 mm; 4.9 × 1.1 × 6.1 in (Approximate)
Weight 840 g; 1.9 lb (Main unit, approximate)
Voice codec G. 726
Audio output power More than 4 W (External SP, at 10% distortion into a 4 Ω load)
External microphone impedance 600 Ω

All stated specifications are subject to change without notice or obligation.

 

INTERFACE

Network 4G bands LTE B2, B4, B12 (USA)
LTE B1, B3, B7, B8, B20 (EXP)
LTE B1, B3, B5, B7, B8, B28 (AUS)
3G bands W-CDMA B2, B5 (USA)
W-CDMA B1, B8 (EXP)
W-CDMA B1, B5 (AUS)
Bluetooth®* Version 2.1 +EDR
LAN RJ-45 type x 1 (Auto MDI/MDI-X)
10BASE-T/100BASE-TX
External speaker jack 3.5 mm (1/8 in) (d), 4 Ω
External equipment connector D-SUB 25-pin type (The optional OPC-2407 is required)

* Version without Bluetooth also available. Ask your Dealer for details.
All stated specifications are subject to change without notice or obligation.

 

 

Applicable U.S. Military Specifications & IP Rating

Standard
 
MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.

 
Ingress Protection Standard
Dust and Water IP54 (Dust-protection, water resistance)
 

Supplied Accessories

  • HM-241, speaker microphone
  • LTE antenna (2 pcs)
  • GPS antenna
  • DC power cable
  • Mounting bracket kit
  • Microphone hanger

## Specifications##

 

## Dimensions##

 

Rear Panel View

## Dimensions##

View AllClose

Additional Information

Laybuy:
No
View AllClose

0 Reviews

View AllClose