Markfish NMEA Interface enables you to create a Waypoint and mark your Fish targets on any brand of GPS or marine multi-function display, all with a single press of your fishfinder's 'Mark' button.

The easy to install Markfish box completes your Fishfinder installation and brings your 'Mark' button to life. Simply press the button to create a Waypoint. This Waypoint will will save directly to your GPS, display the GPS coordinates of the Current location, and be saved automatically for later reference.

The Markfish also has an extra Waypoint trigger input which allows you to place a Waypoint button anywhere on your Boat. That Way, you won't need to run to your Fishfinder to press the 'Mark' button every time you see a school of Fish or an item of interest.

How Do You Install It

Even a color-blind bomb technician could throw this one together.  Here at Markfish, we understand you are not all Mensa graduate electronics geeks and you just want to fish better.  So we did something no other electronic manufacturer has thought of.  Yes, we color-coded the wires. Green to green wire,  yellow to yellow wire. We think you might get it from here.

The diagram below, along with instructions, is included in the Markfish packaging to assist with installation.

Features:

• Connect your Furuno FCV585, FCV620, FCV587, FCV627, FCV588, FCV628, FCV295, FCV600, FCV800 or FCV1150 to any GPS
• Pause Sounder display, scroll around and mark your Waypoint on top of Fish or structure
• Marine grade wiring
• Operating Voltage: 9-15VDC
• Power Consumption: 100mA approx
• NMEA 0183 input/output
• Ability to integrate with future NMEA 2000 models using NMEA 0183 to NMEA 2000 adapter (optional)
• 4800 Bits per second, 8 Bit word, No parity, 1 Stop bit
• Includes 8 x heatshrink glueline crimp connectors