OceanSouth Bowrider Boat Cover

Includes a full set of rope ends, cleats, ratchets and tie-down rope for easy gathering and tightening down the cover.

NOTE - Please check sizes before ordering - no returns if ordered incorrectly

Product Features:

• Design to fit bowrider type boats
• Ideal for trailering and long-term storage.
• Fits boats with bow rails up to 150mm height, and windscreens up to 600mm height.
• The cover is constructed of the highest quality 280gsm Atlas Marine Fabrics.
• Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
• 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
• Air vent provide air circulation.
• Storage bag when not in used
• A full set of Rope Ends, Rope Cleats and Tie-down Rope.

BOAT LENGTH MAX. BEAM WIDTH ORDER CODE

• 4.7m – 5.0m   2.25m   MA 200-9
• 5.0m – 5.3m   2.4m     MA 200-10
• 5.3m – 5.6m   2.4m     MA 200-11
• 5.6m – 5.9m   2.45m   MA 200-12
• 5.9m – 6.3m   2.5m     MA 200-13
• 6.3m – 6.7m   2.5m     MA 200-14

For correct sizing, we recommend to use both the Measuring Instructions and Overall Fabric Measurements guides below to ensure you choose the correct cover size for your boat.

Measuring your boat

1. Measure the length: Measure the centreline length using a straight measurement from bow to stern.
2. Measure the width: Measure a straight line across the widest point of your boat.
3. Measure Height (from gunwale)Measure a straight line from the gunwale to the highest point on your boat including boat fittings e.g.cabins, windscreens etc.

Overall fabric measurements

1. Measure the width: Take the overall fabric width of your suggested cover and compare it by measuring across widest point on your boat and across the highest point of boat fittings (i.e. windscreens, cabins) to the point on the hull where the hem of the cover will finish.
2. Measure the length: Take the overall fabric width of your suggested cover and compare it by measuring across the length of your boat from bow to stern, and across the highest point of any fittings (windscreens, cabins, etc.) to the point on the hull where the hem of the cover will finish.

Note: Total length of the fabric has been made to cover the total length of the boat, from the bow to the stern. This must also accommodate for bow rails, rollers or sprit as these additional features will add to the overall length of the cover.