OceanSouth Jumbo Boat Covers

Includes a full set of rope ends, cleats, ratchets and tie-down rope for easy gathering and tightening down the cover.

NOTE - Please check sizes before ordering - no returns if ordered incorrectly

Product Features:

• Design to fit large cabin boats with canopies
• High cut pattern will comfortably fit over high rails and rocket launchers
• Suitable for long-term storage and light trailering use
• Water resistant and breathable fabric
• Highest quality 280gsm Atlas marine fabrics (7 year life expectancy)
• Flat double lock seam stitching
• High quality UV threads
• 6mm braided rope encased in hem
• Includes a full set of rope ends, rope cleats, tie-down rope and rope ratchets
• Supplied in a handy bag for storage when not in use

BOAT LENGTH FABRIC LENGTH (L) FABRIC WIDTH (W) ORDER CODE

• 5.2m – 5.8m         7680mm  5250mm       MA 501-0
• 5.8m – 6.4m         8180mm  5300mm       MA 501-1
• 6.4m – 7.0m         8830mm  5500mm       MA 501-2
• 7.0m – 7.6m         9480mm  5700mm       MA 501-3
• 7.6m – 8.2m       10080mm  5900mm       MA 501-4

For correct sizing, we recommend to use both the Measuring Instructions and Overall Fabric Measurements guides below to ensure you choose the correct cover size for your boat.

Measuring your boat

1. Measure the length: Measure the centreline length using a straight measurement from bow to stern.
2. Measure the width: Measure a straight line across the widest point of your boat.
3. Measure Height (from gunwale)Measure a straight line from the gunwale to the highest point on your boat including boat fittings e.g.cabins, windscreens etc.

Overall fabric measurements

1. Measure the width: Take the overall fabric width of your suggested cover and compare it by measuring across widest point on your boat and across the highest point of boat fittings (i.e. windscreens, cabins) to the point on the hull where the hem of the cover will finish.
2. Measure the length: Take the overall fabric width of your suggested cover and compare it by measuring across the length of your boat from bow to stern, and across the highest point of any fittings (windscreens, cabins, etc.) to the point on the hull where the hem of the cover will finish.

Note: Total length of the fabric has been made to cover the total length of the boat, from the bow to the stern. This must also accommodate for bow rails, rollers or sprit as these additional features will add to the overall length of the cover.