Reelax - Shotgun Rigging Kit

The Reelax Shot Gun Kit is used for eliminating drop back or line slack once a fish strikes a lure.

It is used to rig a halyard and tag line to the Reelax Shot Gun Pole (part no. 7. 5a).

The Reelax Shot Gun Kit consists of a 316 Stainless Return with rubber bumpers which prevent damage to the outrigger pole if the returns were to come in contact.

Cork Balls are also supplied as stoppers for the Stainless Returns at either ends of the tag line.

The Cork balls prevent the tag weights from jamming on to snap swivels connecting the halyard line.

Also preventing damage to the Stainless Pulley on the Reelax Snubber.

Rosco 851-4/0 USA Black Coast Lock Snap Swivels are used either end of the tag line to connect to the bottom of the Halyard connect swivels.

Also at the end of the Tag Line where a piece of Dacron x 250mm (not included) is tied to for connection to the main line off the rod being trolled via a rubber band.

Aluminum crimps are used to connect Rosco 851-4/0 USA Black Coast Lock Snap Swivels to the Tag Line.

The Reelax Shot Gun Kit uses solid 2. 00mm monofilament which has a black pigmentation for U. V protection and stability.

EYENUTS SUPPLIED MUST BE FINGER TIGHT ONLY AND THREAD LOCK SUCH AS LOCTITE MUST BE USED.

Please Note-All Reelax equipment is made to order and there is a manufacture time of around 7-10 days plus delivery 

Also some of the Reelax range will incur extra freight charges which we will notify you of as soon as we receive your order.