Seajet Pellerclean Seajet Pellerclean Foul Release 325ml (Discontinued)

Seajet Pellerclean Seajet Pellerclean Foul Release 325ml 260090 Pellerclean is a foul-release coating based on silicon, developed with the latest Japanese technology. Pellerclean is environmentally friendly and the primer does not contain any zinc chromate. It provides long term protection against fouling in both fresh and salt water environments.Pellerclean consists of a two part primer for improving adhesion and a silicon topcoat to provide an ultra-slippery surface for releasing any attached fouling. After application any ACcumulated fouling normally washes off the non-stick, slippery surface when underway. For inactive boats, or those cruising below 5 knots, a quick wash or sponge off will remove any surface fouling and make the coating look like new again.Areas of use Propellers Shafts Struts Rudders Trim tabs Any underwater metal surfaceSmall Set 325mlThe small Pellerclean set contains a two pack primer, silicon finish coat, stirring sticks and an application guide. The pack is sufficient for 0.7m or a small propeller.Large Set 1750mlThe big Pellerclean set contains a two pack primer and silicon finish coat. The pack is sufficient for 4m.1741