TMC

Part No. 45109 Toilet - Kit Ref No. 81 Note Used on TMC Standard small & large bowl toilets (45048 & 45052).° Have the M6 brass nut inserts in the base.

TMC Toilet - Base Port Kit Part No. Description  - SP603 Base Port kit 1 x 23 Flap Valve 2 x 24 Discharge Ports - 1 x Strt, 1 x 90dg 3 x 37 S/S Hex Nut 3 x 39 S/S Hex Nut 3 x 42 S/S Screw

TMC Toilet - Pump Body Set 429964 Part No. Description  SP619 Pump body set 1 x 18 Centrifugal Impeller 1 x 19 Macerator Housing 1 x 20 Razor Blade 1 x 21 Rubber Gasket 1 x 27 Body 1 x 29...

TMC Toilet - Base Gasket Kit Part No. Description - SP608 Base Gasket kit 4 x 36 Flat Washer S/S 1 x 44 Base To Bowl Gasket 4 x 45 Hex Bolt 4 x 46 Plastic Washer

A simple one touch contoured control panel featuring built in micro control system allowing two flush options for TMC 12 and 24 volt electric toilets. \n \nFeatures \n Half flush option provides a...

A simple one touch contoured control panel featuring built in micro control system allowing two flush options for TMC 12 and 24 volt electric toilets. \n \nFeatures \n Half flush option provides a...

TMC Bait Bubbler Pump Aerator Self contained, portable aeration system. Operates from two 'D' cell batteries (not included) for approximately ten hours. Supplied complete with 800mm of tubing,...

TMC Anglers Aerator Pump Kit Portable single piece live bait aerator to suit almost any application. Supplied with 1.2 metres of electrical wire fitted with alligator clips. 12 volt, 16 L/m (250 US...

TMC Multi-Purpose Aerator Kit Aerator system supplied complete with 28 L/m (450 US gph) submersible pump, 3 metres of electrical wire fitted with alligator clips, 1.5 metres of 19mm spiral hose, two...

High impact, white ABS plastic housing. In-line installation to suit 75mm (3") ducting hose. Produce air flow of 2800 litres per minute. For intermittent use only.\n\n[table id=780 /]

[table id=469 /]\n\nN.B. 2001 and later toilets have 25mm (1") inlet, prior models have 20mm (3/4") inlets.

[table id=469 /]\n\nN.B. 2001 and later toilets have 25mm (1") inlet, prior models have 20mm (3/4") inlets.