Description
Rooster Rooter – Transducer Spray Deflector - Made in Australia
The easiest to install transducer spray deflector for stopping that annoying rooster tail from ruining your transducer reading and covering the back of your boat with water.
Rooster Rooter transducer spray deflector. Sits between the transducer and the bracket to knock down rooster-tail spray without changing sonar performance.
Construction
- Material: 2 mm marine-grade stainless steel
- Finish: raw stainless (marine use)
- Install: wedges between transducer and stainless or plastic bracket
- Tools: none for standard fitments — no drilling on supported models
- Typical install time: under 2 minutes
|
Part Number |
Brand |
Compatible Transducers |
|---|---|---|
|
BP2301 |
Lowrance / Simrad |
TotalScan, StructureScan 3D, Active Imaging 3-in-1 (not HD FishReveal) |
|
BP2303 |
Garmin |
GT24UHD-TM, GT40-TM, GT41-TM, GT50M-TM, GT51M-TM, GT52HW-TM, GT54UHD-TM, GT56UHD-TM |
|
BP2305 |
Lowrance |
Active Imaging HD 3-in-1 FishReveal |
|
|
|
Important Note: BP2301 does not fit LSS-2 transducers unless additional holes are drilled into the mount. This modification is not recommended. |
Installation Guides
Stainless Steel Install Hardware Included:
- BP2301 & BP2305: 6 x M4X12PPHS-SS - M4 x 12 mm pan head screw
- BP2303: 5 x M4X10PPHS-SS - M4 x 10mm pan head screw
## Compatability##
